In this Topic Hide
Select Operations Handled by Bus Stop
Select Channels Used by Bus Stop
Define Actions for Messages to/from IT System Messaging Service
1. Select the IT Bus Stop tab.
2. Click Bus Stops.
A list of the existing bus stops is shown.
3. Click Add.
A new window opens.
4. Enter the required information as listed below.
5. Click Save.
1. Open the bus stop for editing as shown above.
2. Select the IT Bus Stop tab.
3. Click Bus Stops.
A list of the existing bus stops is shown.
4. Select a bus stop and click Edit. Alternatively, you can double-click on a bus stop.
The bus stop opens.
5. Enter the required information as listed below.
6. Click Save.
1. Open the bus stop for editing as shown above.
2. Select the General tab.
3. Enter a name for the bus stop.
4. Enter a host name.
5. Enter a description in the default language.
This tab allows you to select which operations will be handled by this bus stop.
1. Open the bus stop for editing as shown above.
2. Select the Operations tab.
3. Enable the operations that will be handled by this bus stop.
For information on operations see here.
This tab allows you to select the channels that will be used by this bus stop. The messages contained in the selected channels will be available in the IT Messages Handling tab.
1. Open the bus stop for editing as shown above.
2. Select the Channels tab.
3. Enable the channels that will be used.
This tab allows you to define the actions that will be taken when messages are received through the channels that were selected in the previous tab.
1. Open the bus stop for editing as shown above.
2. Select the Channel Messages Handling tab.
The left-hand pane lists the channels and the messages they contain. The right-hand pane lists the actions that can be carried out.
3. In the right-hand pane select the On receive or On send tab to choose the type of action you want. On receive is for upload messages and On send is for download messages.
4. Drag and drop an action
onto a message on the left-hand pane.
Alternatively, you can select a message, click Add
and select an action from the drop-down list.
5. Enter the required message action parameters.
6. Click OK.
The action is added to the list.
This tab allows you to select the messages on the bus that will be handled by this bus stop. The messages selected in this tab will be available in the Bus Messages Handling tab.
1. Open the bus stop for editing as shown above.
2. Select the Bus Message Subscriptions tab.
Every combination of the operations enabled in the Operations tab and bus message type is listed.
For information on managing operations see here.
3. Enable the operation/message combinations that will be handled by this bus stop.
This tab allows you to define the actions that will be taken when messages are received from the bus.
1. Open the bus stop for editing as shown above.
2. Select the Bus Message Handling tab.
The left-hand pane lists the bus message type and the operations. The right-hand pane lists the actions that can be carried out.
3. In the right-hand pane select the On receive or On publish tab to choose the type of action you want.
4. Drag and drop an action
onto an operation on the left-hand pane.
Alternatively, you can select an operation, click Add
and select an action from the drop-down list.
For information on managing operations see here.
5. Enter the required message action parameters.
6. Click OK.
The action is added to the list.