Code |
Message |
0 |
No error |
1 |
An unknown error occurred |
2 |
The specified variable is unknown |
3 |
The feature has an unknown type |
4 |
Feature does not have the specified characteristic |
5 |
A characteristic was not specified |
6 |
The characteristic specified is unknown |
7 |
The specified feature was not found |
8 |
The specified sample was not found |
9 |
Feature does not have specification limits for this characteristic |
10 |
The specified query was not found |
11 |
The specified routine was not found |
12 |
Feature does not have data for specified Sample |
13 |
Insufficient data to perform calculation |
14 |
No value found |
15 |
No Cp value |
16 |
No CpK value |
17 |
No CR value |
18 |
No CpM value |
19 |
No Pp value |
20 |
No PpK value |
21 |
No PR value |
22 |
No Mean value |
23 |
No Mean Moving Range value |
24 |
No Mean Moving Average value |
25 |
No Grand Subgroup Average |
26 |
No Mean Range value |
27 |
No Mean Standard Deviation value |
28 |
No Standard Deviation value |
29 |
No Estimated Standard Deviation value |
30 |
No Target Standard Deviation value |
31 |
No Sigma value |
32 |
No Hi value |
33 |
No Low value |
34 |
No Sum value |
35 |
No Range value |
36 |
No Valid Count value |
37 |
No Total Count value |
38 |
No Invalid Count value |
39 |
No Out of Specification Limits Count value |
40 |
No-Specification-Limits-Count value unavailable |
41 |
No Percent Valid value |
42 |
No Percent Invalid value |
43 |
No USL value |
44 |
No LSL value |
45 |
No upper control limit value available |
46 |
No lower control limit value available |
47 |
No XBAR-R UCL value |
48 |
No XBAR-R LCL value |
49 |
No X-MR UCL value |
50 |
No X-MR LCL value |
51 |
No XBAR-S UCL value |
52 |
No XBAR-S LCL value |
53 |
No Range UCL value |
54 |
No Range LCL value |
55 |
No Standard Deviation UCL value |
56 |
No Standard Deviation LCL value |
57 |
No Moving Range UCL value |
58 |
No Moving Range LCL value |
59 |
No Moving Average UCL value |
60 |
No Moving Average LCL value |
61 |
No Target (nominal) value |
62 |
No Nominal value |
63 |
No Feature or Sample Number specified |
64 |
Unable to derive characteristic from provided data. |
65 |
DataSet not found |
66 |
DataSet does not contain any data |
67 |
DataSet contains too many rows |
68 |
Invalid row for DataSet |
69 |
Invalid reference to dataset values |
70 |
Data Set has invalid subgroup size |
71 |
Data Set has invalid row number (feature or sample#) |
72 |
Specification Limits Differ |
73 |
Data Set is unable to allocate memory for expansion |
74 |
Data Set has no statistical information (check selections) |
75 |
Chart plot scales are invalid |
76 |
Feature Target values differ in transposed dataset |
77 |
Feature USL values differ in transposed dataset |
78 |
Feature LSL values differ in transposed dataset |
79 |
Invalid actual type |
80 |
DataSource must be a DataStack |
81 |
Variable needs parameter(s) |
82 |
Invalid parameter |
83 |
Expression parenthesis or brackets are unbalanced |
84 |
Invalid expression |
85 |
Error in formula expression at character |
86 |
Memory allocation error |
87 |
Unbalanced tildes (variable ~delimiters~) |
88 |
Sheet not found |
89 |
DataBase not connected |
90 |
Vector not found |
91 |
Invalid combination of actual data |
92 |
Nominal data incomplete or missing |
93 |
No Median available |
94 |
No Lower Quartile available |
95 |
No Upper Quartile available |
96 |
No Inter Quartile Range available |
97 |
No Lower Inner Fence available |
98 |
No Upper Inner Fence available |
99 |
No Lower Outer Fence available |
100 |
No Upper Outer Fence available |
101 |
No correlation coefficient available |
102 |
No Box Hi available |
103 |
No Box Lo available |
104 |
No Out-of-Control indication |
105 |
No Tolerance Value |
106 |
No actual limit value |
107 |
No feature limit value |
108 |
No routine alignment found for routine |
109 |
No cause value for feature actual |
110 |
An unknown error occurred |
111 |
No upper tolerance value |
112 |
No lower tolerance value |
113 |
Feature UT values differ in transposed dataset |
114 |
Feature LT values differ in transposed dataset |
115 |
Invalid Feature Type |
116 |
No User One value |
117 |
No User Two value |
118 |
No User Three value |
119 |
No User Four value |
120 |
No upper limit value |
121 |
No lower limit value |
122 |
Feature UpperLimit values differ in transposed dataset |
123 |
Feature LowerLimit values differ in transposed dataset |
124 |
Invalid DataSet Usage Type |
125 |
No Skewness value available |
126 |
No Kurtosis value available |
127 |
No Range value available |
128 |
Invalid Index encountered calculating Correlation Coefficient |
129 |
Invalid index encountered calculating curve fit |
130 |
No valid subgroups |
131 |
Actual value is masked and unavailable, check assigned cause |
132 |
Invalid dataset or datastack setup. See logged error information for details. |
133 |
SMI convert offset is not valid |
134 |
SMI convert ordinate is not valid |
135 |
SMI convert offset axis is not valid |
136 |
Ambiguous due to multiple Routines |
137 |
No Conform Count value |
138 |
No NonConform Count value |
139 |
No Percent Conform value |
140 |
No Percent NonConform value |
141 |
No Process Nominal value |
142 |
No Process MaxSubSize value |
143 |
No Process Sample Count |
144 |
No Process Standard Deviation value |
145 |
No Process Estimated Standard Deviation value |
146 |
No Process Target Standard Deviation value |
147 |
No Process Upper Specification Limit (USL) value |
148 |
No Process Lower Specification Limit (LSL) value |
149 |
No Process Mean (Centerline) value |
150 |
No Process Range Average (R-Bar) value |
151 |
No Process Standard Deviation Average (S-Bar) value |
152 |
No Process Individual Subgroup Grand Average (X-BarBar) value |
153 |
No Process Moving Range Average (MR-Bar) value |
154 |
No Process Grand Moving Average (MA-Bar) value |
155 |
No Process Pp value |
156 |
No Process PR value |
157 |
No Process PpK value |
158 |
No Process Cp value |
159 |
No Process CR value |
160 |
No Process CpK value |
161 |
No Process CpM value |
162 |
No Process Effective Date value |
163 |
Not enough valid points to calculate CP values |
164 |
Not enough valid subgroups to calculate CP values |
165 |
No Estimated Standard Deviation to calculate CP values |
166 |
Data is out-of-control. Statistic rules prohibit calculating CP values |
167 |
No appropriate control limits for usage type. Statistic rules prohibit calculating CP values |
168 |
No appropriate spec limits for usage type. Statistic rules prohibit calculating CP values |
169 |
Data is out-of-specification. Statistic rules prohibit calculating CP values |
170 |
Feature does not have any specification limit 2 for this characteristic |
171 |
No lower limit 2 value |
172 |
No upper limit 2 value |
173 |
Feature does not have any reasonable limit for this characteristic |
174 |
No lower reasonable limit value |
175 |
No upper reasonable limit value |
176 |
MSA -Out-of-control range violation |
177 |
MSA -No control limit for range |
178 |
MSA -Invalid tolerance |
179 |
MSA -No estimated standard deviation |
180 |
MSA -No standard deviation |
181 |
MSA -Invalid study type |
182 |
MSA -Invalid setup |
183 |
MSA -No equipment variation |
184 |
MSA -No operator variation |
185 |
MSA -No repeatability/reproducibility |
186 |
MSA -No part variation |
187 |
MSA -No total variation |
188 |
MSA -No measurement variation |
189 |
MSA -No program factor |
190 |
MSA -No study tolerance |
191 |
MSA -No number of operators |
192 |
MSA -No number of trials |
193 |
MSA -No number of parts |
194 |
MSA -No target minimum |
195 |
MSA -No target maximum |
196 |
MSA -No study date |
197 |
MSA -No update date |
198 |
MSA -No effective date |
199 |
MSA -No status available |
200 |
MSA -Not done |
201 |
Data is not normally distributed. Statistic rules prohibit calculating CP/PP values |
202 |
An error occurred while transforming data |
203 |
An error occurred creating a process transform |
204 |
No normality status available |
205 |
No dataset target value available |
206 |
No dataset center value available |
207 |
No dataset spread value available |
208 |
No CP/PP values - Process is collecting data |
209 |
No CP/PP values - MSA not done |
210 |
No CP/PP values - MSA failed |
211 |
No process CP/PP values - Process is collecting data |
212 |
No process CP/PP values - MSA not done |
213 |
No process CP/PP values - MSA failed |
214 |
No range of variation center value |
215 |
No range of variation spread value |
216 |
No range of variation target value |
217 |
No range of variation percent value |
218 |
No Out of Specification Limits2 Count value |
219 |
No-Specification-Limits2-Count value unavailable |
220 |
Only Valid for Deviations |