You can now establish the default relationships between a quality concern and all of the possible repairs that can be associated with it.
When these relationships have been defined the associated repairs will automatically be assigned every time the concern is associated to a part.
Here are the concern/repair relationships that must be created:
|
Concern |
Repairs |
||
|
Dent |
Replace |
Rework Metal |
No problem found |
|
Loose |
Replace |
Tighten |
No problem found |
|
Thin Paint |
Replace |
Repaint |
No problem found |
|
Missing |
Install |
No problem found |
|
|
Scratch |
Repaint |
No problem found |
|
|
Wrong Part |
Replace |
No problem found |
|
Select the Attribute tab.
Click Parts/Concerns/Repairs.
The Parts/Concerns/Repairs window opens. For now you just want to add repairs from the right-hand pane to concerns in the centre pane.
Drag and drop repairs from the list on the right to the desired concern in the centre. You can select multiple Repairs at the same time by holding down the Ctrl key.