.png)
|
|
|
|
|
|
This tutorial may also be used to create a Config in any DataSmith file to be read into a standard CM4D database.
The "LegoMan" data files are *.txt files based on the format of data exported by a CAM2 Q measurement device. The configuration created to read that type of data allows all nominal and measurement data to be read into the database at the same time using a single configuration.
Single Configuration
Click Step 1 to begin the tutorial, or select any of the following links to jump to a specific step.
Legoman Step 1: Create a Config
Legoman Step 2: Modify the Config
Legoman Step 4: Define the Header
Legoman Step 5: Define a Feature
Legoman Step 6: Define Header Characteristics
Legoman Step 7: Define Feature Characteristics – Feature Label
Legoman Step 8: Define Feature Characteristics – Nominals (XYZ)
Legoman Step 9: Define Feature Characteristics – Deviations (XYZ)
Legoman Step 10: Define Feature Characteristics – Upper Spec Limits (XYZ)
Legoman Step 11: Define Feature Characteristics – Lower Spec Limits (XYZ)
Legoman Step 12: Review Results of Legoman
Below are screen captures of what the file highlighting and the grid in DataSmith will look like once all of the steps have been completed.
Show/Hide Highlighted DataSmith File Result
Show/Hide DataSmith Grid Result
