Allow Annot Off Sheet

allow_annot_off_sheet

0

1

Allows annotation to be placed off of the sheet (on the green area). When this option is off (set to '0'), any annotation moved off of the sheet snap back to the nearest sheet margin.

Allow Terminator Select

allow_terminator_select

1

0

Auto Orient - Zoom to Feature Minimum Distance

autoorient_zoomfeature_min_distance

200

Any integer

Applies to Views that use the Auto Orient 'Zoom to Features'. It can be used in cases where the view zooms to a single feature or closely grouped features so the camera position does not end up too close to the model to be able to tell where the feature is on the part. When set to a larger value, the camera will stop at the set position regardless of what would otherwise be dictated by the zoom on the feature.

The value represents millimeters.

Documents set to Inches automatically re-calculates accordingly during resolve.

Axis Label - Primary

primary_axis_label

X

Any character (A-Z)

See the topic, View Axes.

Axis Label - Secondary

secondary_axis_label

Y

Any character (A-Z)

See the topic, View Axes.

Axis Label - Tertiary

tertiary_axis_label

Z

Any character (A-Z)

See the topic, View Axes.

Background Image Loads

BACKGROUNDIMAGELOADS

1

0

Backup Documents

BACKUPDOCUMENTS

1

0

When disabled, CM4D will not create backup files (*.4bk) for saved CM4D documents

CM4D Scheduler Scratch Location

CM4DSCHEDULERSCRATCHLOCATION

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Compare Precision

comparePrecision

6

Any integer

Debug Alignment

DEBUGALIGNMENT

0

1

Decimals

decimals

2

Any integer

Default Control Limit

defaultcontrollimit

100

Any integer1

Default Log Path

DEFAULTLOGPATH

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

The directory where all log message files will be stored, unless specified by one of the application-specific attributes for log folder locations

Defrag Documents

DEFRAGDOCUMENTS

1

0

Direction Label - Primary

primary_dir_label

FORE/AFT

Any Text

Direction Label - Secondary

secondary_dir_label

IN/OUT

Any Text

Direction Label - Tertiary 

tertiary_dir_label

HI/LO

Any Text

Direction Minus Label - Primary

primary_dir_minus_label

FORE

Any Text

Values in the Minus column will appear when the number is a negative integer.

Direction Minus Label - Secondary

secondary_dir_minus_label

IN

Any Text

Values in the Minus column will appear when the number is a negative integer.

Direction Minus Label - Tertiary

tertiary_dir_minus_label

LO

Any Text

Values in the Minus column will appear when the number is a negative integer.

Direction Plus Label - Primary

primary_dir_plus_label

AFT

Any Text

Values in the Plus column will appear when the number is a positive integer.

Direction Plus Label - Secondary

secondary_dir_plus_label

OUT

Any Text

Values in the Plus column will appear when the number is a positive integer.

Direction Plus Label - Tertiary

tertiary_dir_plus_label

HI

Any Text

Values in the Plus column will appear when the number is a positive integer.

Event Smith Log Retention Days

EVENTSMITHLOGRETENTIONDAYS

0

Any number between 0 and 365

Represents days

Event Smith Server Refresh

EVENTSMITHSERVERREFRESH

30

Any number between 10 and 86,400

Represents seconds

Ghost Border

ghost_border

0

1

Grid Spacing

gridSpacing

2.5

Any integer

Initial Locale

initial_locale

en-us

Any region/language code (xx-xx)

Set the default Locale Settings selection in the Document Defaults for new documents. This setting is not case-sensitive; follow the standard format "xx-xx" region/language code.

Load Routine Access Codes

LOADROUTINEACCESSCODES

0

1

1= Routine Access Codes are loaded from each Database and displayed in SiteManager
0= Routine Access Codes are not loaded or displayed (default)
If you do not use Routine Access codes, leave this setting disabled for a performance increase.

Log CM4D

LOGCM4D

none

all, errors, milestones, detail, developer

Log CM4D Destination Local

LOGCM4DDESTINATIONLOCAL

1

0

Log CM4D Destination Server

LOGCM4DDESTINATIONSERVER

1

0

Log CM4D Destination Trace

LOGCM4DDESTINATIONTRACE

1

0

Log DataSmith

LOGDATASMITH

none

all, errors, milestones, detail, developer

Log DataSmith Batch

LOGDATASMITHBATCH

none

all, errors, milestones, detail, developer

Log EventSmith

LOGEVENTSMITH

none

all, errors, milestones, detail, developer

Log Launcher

LOGLAUNCHER

none

all, errors, milestones, detail, developer

Log Launcher Destination Local

LOGLAUNCHERDESTINATIONLOCAL

1

0

Log Launcher Destination Server

LOGLAUNCHERESTINATIONSERVER

1

0

Log Launcher Destination Trace

LOGLAUNCHERDESTINATIONTRACE

1

0

Log Message Path

LOGMESSAGEPATH

Logs

Any valid, writable folder path

The location of the folder where the DataSmith log message files will be stored

Log Messages

LOGMESSAGES

0

1

Enables the logging of message information while running DataSmith - this should be set to zero unless you are debugging DataSmith

Log Path CM4D

LOGPATHCM4D

C:\Program Files\Applied Tech Systems\CM4D\

Log Path DataSmith

LOGPATHDATASMITH

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Path DataSmith Batch

LOGPATHDATASMITHBATCH

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Path EventSmith

LOGPATHEVENTSMITH

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Path Launcher

LOGPATHLAUNCHER

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Path Results Launcher

LOGPATHRESULTSLAUNCHER

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Path Results Service

LOGPATHRESULTSSERVICE

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Path Scheduler

LOGPATHSCHEDULER

C:\Program Files\Applied Tech Systems\CM4D\

Any valid, writable folder path

Log Results Launcher

LOGRESULTSLAUNCHER

none

all, errors, milestones, detail, developer

Log Results Service

LOGRESULTSSERVICE

none

all, errors, milestones, detail, developer

Log Scheduler

LOGSCHEDULER

none

all, errors, milestones, detail, developer

Log Scheduler Destination Local

LOGSCHEDULERDESTINATIONLOCAL

1

0

Log Scheduler Destination Trace

LOGSCHEDULERDESTINATIONTRACE

1

0

Marker Color - Neutral

marker_color_default_neutral

0x000000

See also:

Color Reference

See also:

Document Feature Marker Colors

Marker Color - Nominal

marker_color_default_nominal

16711935

Marker Color - Good Value

255,0,0

Marker Color - High Value

marker_color_default_value_hi

0x0,0x0,0xFF

Marker Color - Low Value

marker_color_default_value_lo

0xFF,0xFF,0x0

Marker Color - Limits

marker_color_default_limits

0x0,0xFF,0xFF

Marker Color - Distance X

marker_color_default_distance_x

0xC0,0xC0,0xC0

Marker Color - Distance Y

marker_color_default_distance_y

0x0,0xFF,0x0

Marker Color - Distance Z

marker_color_default_distance_z

85,107,47

Marker Color - Distance 3D

marker_color_default_distance_3d

0,128,128

Process Change Log Minimum Length

PCLMINLENGTH

10

Any integer

This parameter determines the number of characters that must be entered into the Comments dialog when Process Change Logging is enabled. If this parameter is not added to the Cm4d.ini file, PCL will work as before (requiring the default of at least 10 characters in the Comment dialog.)

0 = No character requirement

PDF Print Driver

PDFPRINTDRIVER

eDocPrinter

ATS CM4D Printer

Enter the type of PDF driver that is used to print PDF files from CM4D.

Print View Resolution

PRINTVIEWRESOLUTION

1

0-3

This is the DPI resolution of the view when printed. Correlates to the Snapshot View Resolution options.

• 0 = Not Set

• 1 = Low Resolution

• 2 = Medium Resolution

• 3 = High Resolution

Results Export Batch Size

RESULTSEXPORTBATCHSIZE

1000

Any integer

The Results export batch size value is the number of results that will be grouped together in the Results Export Queue before they are sent to the Results Services.

This is really only used for performance tuning. Generally, this number will not need to be adjusted.

Site SMTP Server (old EventSmith only)

SITESMTPSERVER

smtp.yourserver.com

Any valid SMTP Server

This value is the e-mail EventSmith Server uses. You can find this value by looking at Microsoft Outlook or Outlook Express at the server or any other computer where EventSmith Server is installed. If this server is not set, or cannot connect, the EventSmith Service will not start.
Does not apply if using the default EventSmith SMTP included with the CM4D Server installation.

Site UNC

SITEUNC

1

0

Applies to filename paths for Managed Documents.
0=  either local filename paths or UNC filename paths are allowed for managed documents
1= only UNC filename paths are allowed for managed documents

Timing Log Enabled

TIMINGLOGENABLED

1

0

When enabled, timing log files will be generated per session, and, in the case of
DataSmith Batch, per thread.
NOTE: To use the timing log, the "TIMINGLOGFORPERFORMANCE" option must be set to zero  (turned off). The two timing log types cannot be used at the same time.

Timing Log Folder

TIMINGLOGFOLDER

C:\Program Files\Applied Tech Systems\CM4D\Timing

Any valid, writable folder path

If this is left blank, the Timing folder will be created wherever you have CM4D installed. If you would like the Timing log files to be stored someplace other than the installation folder, enter the path here. Both local and UNC paths are supported.

Timing Log for Performance

TIMINGLOGFORPERFORMANCE

0

1

Logs only performance information. For full timing logging, use "TIMINGLOGENABLED".
NOTE: To use the timing for performance, the "TIMINGLOGENABLED" option must be set to zero (turned off). The two timing log types cannot be used at the same time.

Trace Level

TRACELEVEL

1

Units

units

mm

in

Use Routine Codes for ID

UseRoutineCodesForID

0

1

When saving a CM4D document, any Routine identification within the Query must be preserved. By default, the Routine is identified by its Routine Key. However, if this parameter is set to 1, then the Routine will be identified by the Routine Code.