Control Limit Variables

MA-MR Limits

~uclma~

Returns the Upper Control Limit MA for MA-MR.

~lclma~

Returns the Lower Control Limit MA for MA-MR.

~uclmr~

Returns the Upper Control Limit MR for MA-MR.

~lclmr~

Returns the Lower Control Limit MR for MA-MR.

X-Bar & S Limits

~uclxbs~

Returns the Upper Control Limit Xbar for X-Bar & S.

~lclxbs~

Returns the Lower Control Limit Xbar for X-Bar & S.

~ucls~

Returns the Upper Control Limit S for X-Bar & S.

~lcls~

Returns the Lower Control Limit S for X-Bar & S.

X-Bar & R Limits

~uclxbr~

Returns the Upper Control Limit Xbar for X-Bar & R.

~lclxbr~

Returns the Lower Control Limit Xbar for X-Bar & R.

~uclr~

Returns the Upper Control Limit R for X-Bar & R.

~lclr~

Returns the Lower Control Limit R for X-Bar & R.

X-MR Limits

~uclxmr~

Returns the Upper Control Limit X for X-MR.

~lclxmr~

Returns the Lower Control Limit X for X-MR.

~uclmr~

Returns the Upper Control Limit MR for X-MR.

~lclmr~

Returns the Lower Control Limit MR for X-MR.

Control Limit Variable Parameters

Parameters can be added after the characteristic in a control limit variable as listed in the table below. The parameters 'first' and 'last' may return the effective dates of the first and last labeled feature.

~variable,characteristic,parameter~
variable	characteristic	parameter	-parameter description
lclxbr	x y z etc...	abs	-absolute limit value
		rel	-relative (to nominal) limit value
		eff	-effective date
		date	-limit update date
		first	-first sample order label
		last	-last sample order label

Example 1: The variable ~lclxbr,x,last~ would return the last sample order date of the x characteristic's lower control limit for Xbar with Range.

Example 2: A simplified form of the variables above which could be used are as follows:
- ~lcl,pri,last~ for Primary top control chart, i.e. XBar
- ~lcl,sec,last~ for Secondary bottom control chart, i.e. Range