Tutorial Overview

• During this tutorial you will need to carry out some steps in Cockpit so it is best to have both Admin and Cockpit running.

In this tutorial you will use all the main features of Admin. Using a bicycle manufacturing plant as an example you will enter all the required information that will allow you to correctly enter defects and generate reports.

The following steps must be carried out:

1.     Define the Layout of the Plant

2.     Define the Shifts

3.     Define the Product

4.     Define the Defects

5.     Define the Images

6.     Define a Tracking Point

7.     Define the Inspection Station

8.     Define the Checklist